Camera Control - Bosch VIP X1 Installation And Operating Manual

EN | 92

Camera control

Control options for peripheral devices (such as a pan and tilt head or a dome
camera) depend on the type of device installed and the configuration of the
VIP X.
If a controllable device (such as a dome camera) is configured and connected
to the VIP X, the controls for the device are displayed next to the video image.
– To control a peripheral device click the appropriate controls.
– Move the mouse pointer over the video image. Additional options for
controlling peripheral devices are displayed with the mouse pointer.
Digital I/O
Depending on the configuration of the unit, the alarm inputs and the relay output
are displayed next to the camera image (see Livepage configuration,
page 82).
The alarm symbols Input1 ... Input4 are for information and indicate the input
status of an alarm input: Active 1 = Symbol lit green, Active 0 = Symbol not lit.
The relay on the VIP X allows you to operate a device (for example a light or a
door opener).
– To operate, click the relay symbol next to the video image. The symbol will be
red when the relay is activated.
Operation
Installation and Operating Manual | VIP X1/VIP X2
Bosch Security Systems | 2005-10 | V1.5