Display Stamping - Bosch VIPX2 Installation And Operating Manual

VIP X2 | Installation and Operating Manual

Display stamping

Various overlays or "stamps" in the video image provide important supplemen-
tary information. These overlays can be enabled individually and are arranged
on the image in a clear manner.
Note
The settings on this page apply to both camera inputs.
Camera name stamping:
This field sets the position of the camera name overlay. It can be displayed at
the Top, at the Bottom or at a position of your choice that you can then specify
using the Custom option. Or it can be set to Off for no overlay information.
Time stamping:
This field sets the position of the time overlay. It can be displayed at the Top, at
the Bottom or at a position of your choice that you can then specify using the
Custom option. Or it can be set to Off for no overlay information.
Alarm mode stamping:
Choose On to display a text message overlay in the event of an alarm. It can be
displayed at a position of your choice that you can then specify using the Cus-
tom option. Or it can be set to Off for no overlay information.
– Select the desired position from the lists.
– If you select the Custom option, additional fields are displayed where you
can specify the exact position (Position (XY):).
– In the Position (XY): fields enter the values for the desired position.
Bosch Security Systems | 2006-12 | V2.5
EN | 37
Configuration using a Web browser