Repairs; Transfer And Disposal - Bosch VIP X1 Installation And Operating Manual

EN | 102
– If necessary, back up the current configuration using the Download button
on the Firmware and configuration upload page (see page 85).
– Using a pointed object, press the Factory-reset button located below the USB
interface until the operating status LED flashes red (see page 15). All settings
will revert to their defaults.
– Change the IP address of the unit if necessary.
– Configure the unit to meet your requirements.

Repairs

Warning!
Never open the casing of the VIP X. The unit does not contain any user
serviceable parts.
Ensure that all maintenance or repair work is performed only by qualified
personnel (electrical engineering or network technology specialists). In case of
doubt, contact your dealer's technical service center.

Transfer and disposal

The VIP X should only be passed on together with this installation and user
guide.
Your Bosch product is designed and manufactured with high quality materials
and components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of-life,
should be disposed of separately from your household waste.
In the European Union, there are separate collection systems for used electrical
and electronic products. Please, dispose of this equipment at your local
community waste collection/recycling centre.
Maintenance and upgrades
Installation and Operating Manual | VIP X1/VIP X2
Bosch Security Systems | 2005-10 | V1.5