Stop Bits; Parity Check - Bosch VIP X1 Installation And Operating Manual

VIP X1/VIP X2 | Installation and Operating Manual
Note
If you are using a Bosch AutoDome, remember that the value of the
Camera ID must always be selected 1 less than the Bosch camera number
(for example: Bosch camera number: 1, Camera ID: 0).
Baud rate:
Select the value for the transmission rate in Bit/s.
Data bits:
The number of data bits per character cannot be changed.

Stop bits:

Select the number of stop bits per character.

Parity check:

Select the type of parity check.
Interface mode:
Select the desired protocol for the serial interface.
Half-duplex mode:
Choose the setting appropriate for your application.
Bosch Security Systems | 2005-10 | V1.5
EN | 47
Configuration using a Web Browser