Figure 167: Summit X250e-24t switch front panel
Stack number indicator
The front panel on the Summit X250e-24t switch includes:
LEDs—For a description of the LEDs and their operation, see
●
on page
250.
Stack number indicator—Numeric indicator of the position of this switch in a stacked configuration.
●
10/100BASE-T Ethernet ports—Twenty-four 10/100BASE-T Ethernet ports that deliver high-density
●
copper connectivity.
Combination ports—Two combination ports that provide 10/100/1000 BASE-T or mini-GBIC
●
connectivity for 2 Gbps of copper or fiber connectivity.
Console port—Serial port used to connect a terminal and perform local management.
●
Summit X250e-24t Switch Rear Panel
Figure 168
shows the rear panel of the Summit X250e-24t switch.
Figure 168: Summit X250e-24t switch rear panel
Management port
10 Gigabit
stacking ports
The rear panel on the Summit X250e-24t switch includes:
Management port
●
Used to connect the system to a parallel management network for administration.
■
OR
Used to connect an Ethernet cable directly from a laptop into the management port to view and
■
locally manage the switch configurations.
Two LEDs for the management port, located in the bottom corners of the port.
●
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
10/100 Mbps ports
Stack
1
2
External power
supply connection
Redundant Power Input
! See Manual
Power socket
Summit X250e Series Switches
Console
port
Shared ports
SH_038A
"Summit X250e Series Switch LEDs"
SH_039
243