Blackdiamond 12802 Switch Chassis - Extreme Networks BlackDiamond 8800 Series Hardware Installation Manual

BlackDiamond 12802 Switch Chassis

The BlackDiamond 12802 chassis consists of the following components:
One 3-slot chassis with backplane
●
Two dedicated I/O module slots, labeled 1 and 2
●
One MSM slot, labeled MSM
●
Up to four redundant AC or DC power supplies, accessed from the back of the unit
●
One fan tray, accessed from the back left of the unit
●
One connector for an ESD-preventive wrist strap
●
Figure 14 shows a BlackDiamond 12802 chassis equipped with one MSM and two I/O modules.
Figure 14: Front of the BlackDiamond 12802 chassis
MSM slot
Figure 15 shows the rear panel of the BlackDiamond 12802 chassis.
Figure 15: Rear panel of the BlackDiamond 12802 chassis
Fan tray
supplies
The rear panel of the BlackDiamond 12802 chassis provides:
Access to the fan tray
●
Access to the PSU/fan controller module
●
Four bays for installing power supplies
●
Attachment point for optional chassis ground
●
The bottom of the chassis has a label showing safety certification symbols and the Ethernet MAC
address of the switch. The chassis serial number is on the side near the back of the chassis.
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
PSU/fan controller
module
Power

BlackDiamond 12802 Switch Chassis

ESD wrist strap
connector
I/O module
slots
BD_141
Grounding
point
BD_142A
49