Extreme Networks BlackDiamond 8800 Series Hardware Installation Manual page 195

3 Hold the AC power cord retainer channel in the position shown in
Figure 123: BlackDiamond 8806/12804 AC power cord retainer channel
Captive screw
4 Place the retainer channel against the switch as shown in
each end of the channel.
Figure 124: Securing the BlackDiamond 8806/12804 AC power cord retainer channel
5 Starting from the left, lay the first four power cords into the channel (see
6 Lay the last two power cords on top of the bottom four cords (see
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
BlackDiamond 8806/12804 AC Power Cord Retainer Channel
Install and secure the channel bracket to
the switch by tightening both captive screws
Captive screw
Figure 123.
Captive screw
Figure 124. Tighten the captive screw at
Captive screw
Figure 125).
Figure 125).
EX_141
EX_139
195