Chapter 18: Repacking A Blackdiamond Chassis; Safety Information - Extreme Networks BlackDiamond 8800 Series Hardware Installation Manual

18 Repacking a BlackDiamond Chassis
This chapter describes how to remove a BlackDiamond chassis from an equipment rack and repack the
chassis for shipping back to Extreme Networks. To repack a BlackDiamond chassis, use the original
shipping crate or box and packing materials.
This chapter includes the following sections:
Safety Information on page 227
●
Repacking the BlackDiamond 8810 Chassis on page 228
●
Repacking the BlackDiamond 8806/12804 Chassis on page 231
●
Repacking the BlackDiamond 12802 Chassis on page 234
●
Repacking the BlackDiamond 10808 Chassis on page 235
●
NOTE
Read the information in this chapter thoroughly before you attempt to remove a BlackDiamond chassis.

Safety Information

CAUTION
Correct lifting procedures for a BlackDiamond chassis require two or more people.
Only trained service personnel should perform service to Extreme Networks switches and their
components. Trained service personnel have read all related installation manuals, have the technical
training and experience necessary to be aware of the hazards to which they are exposed in performing a
task, and are aware of measures to minimize the danger to themselves or other persons.
NOTE
See Appendix A, "Safety Information"
for additional information regarding regulatory compliance certifications.
CAUTION
A BlackDiamond chassis should be empty before being lifted. This will also prevent damage to the system
components due to possible system chassis flex when lifting.
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
for additional safety information and Appendix B, "Technical Specifications"
227