Summit Family of Switches
NOTE
For information about mini-GBICs, see
Two high-performance stacking ports with associated LEDs
●
Redundant power input connector for use with the EPS-160 External Power Module. When this
●
power supply unit is used with the Summit X250e-48t switch, the power supplies (internal and
redundant) are fully fault tolerant and load-sharing. If one power supply fails, the other power
supply will provide sufficient power to operate the switch.
Summit X250e-48t Switch Front Panel
Figure 171
shows the front panel of the Summit X250e-48t switch.
Figure 171: Summit X250e-48t switch front panel
The front panel on the Summit X250e-48t switch includes:
LEDs—For a description of the LEDs and their operation, see
●
on page
250.
Stack number indicator—Numeric indicator of the position of this switch in a stacked configuration.
●
10/100BASE-T Ethernet ports—Forty-eight 10/100BASE-T Ethernet ports that deliver high-density
●
copper connectivity.
Combination ports—Two combination ports that provide 10/100/1000 BASE-T or mini-GBIC
●
connectivity for 2 Gbps of copper or fiber connectivity.
Console port—Serial port used to connect a terminal and perform local management.
●
Summit X250e-48t Switch Rear Panel
Figure 172
shows the rear panel of the Summit X250e-48t switch.
246
"Mini-GBIC Interfaces" on page
Stack number indicator
338.
10/100 Mbps ports
"Summit X250e Series Switch LEDs"
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
Console
port
Shared ports
SH_044A