Summit X450A-24Tdc Switch Rear Panel - Extreme Networks BlackDiamond 8800 Series Hardware Installation Manual

Summit Family of Switches
The front panel on the Summit X450a-24tDC switch consists of:
LEDs—For a description of the LEDs and their behavior, see
●
Switch LEDs" on page
Stack number indicator—Numeric indicator of the position of this switch in a stacked configuration.
●
Combination ports—Four combination ports that provide 10/100/1000 BASE-T or mini-GBIC
●
connectivity for 4 Gbps of copper or fiber connectivity.
10/100/1000 BASE-T Ethernet ports—Twenty 10/100/1000 BASE-T Ethernet ports that deliver high-
●
density copper connectivity in 1.75-inch (1U) form factor.
Console port—Serial port used to connect a terminal and perform local management.
●

Summit X450a-24tDC Switch Rear Panel

Figure 182 shows the rear panel of the Summit X450a-24tDC switch.
Figure 182: Summit X450a-24tDC switch rear panel
The rear panel on the Summit X450a-24tDC switch consists of:
Slot for a Summit option card
●
Summit XGM2-2xn option card, which allows you to add up to two 10 Gigabit XENPAK modules
■
OR
Summit XGM2-2xf option card, which allows you to add up to two 10 Gigabit XFP modules
■
NOTE
For information regarding these compatible Summit option cards, see
page 297 or
Management port
●
Used to connect the system into a parallel management network for administration.
■
OR
Used to connect an Ethernet cable directly from your laptop into the management port to view
■
and locally manage the switch configurations.
Two LEDs for the management port, located at the bottom corners of the port.
●
Two high-performance stacking ports
●
260
276.
Management port
10 Gigabit
uplink option
"Summit XGM2-2xf Option Card" on page
"Summit X450, X450a, and X450e Series
External power
supply connection
10 Gigabit DC power
stacking ports socket
"Summit XGM2-2xn Option Card" on
302.
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
-48 V
2 . 0 A M a x
SH_026