Summit Family of Switches
Summit X450e-48p Switch Rear Panel
Figure 194
shows the rear panel of the Summit X450e-48p switch.
Figure 194: Summit X450e-48p switch rear panel
The rear panel on the Summit X450e-48p switch includes:
Slot for a Summit option card
●
Summit XGM2-2xn option card, which allows you to add up to two 10 Gigabit XENPAK modules
■
OR
Summit XGM2-2xf option card, which allows you to add up to two 10 Gigabit XFP modules
■
NOTE
For information regarding these compatible Summit option cards, see
page 297
or
Management port
●
Used to connect the system into a parallel management network for administration.
■
OR
Used to connect an Ethernet cable directly from your laptop into the management port to view
■
and locally manage the switch configurations.
Two LEDs for the management port, located in the bottom corners of the port.
●
Two high-performance stacking ports
●
Redundant power input connector for optional connection to an EPS-C chassis, which can hold up to
●
three EPS-600LS external power modules. The PoE capability of the Summit X450e-48p switch varies
depending on the number of external power modules in use. For complete details, see
External Power Module" on page
with the EPS-C chassis.
AC power socket
●
The switch automatically adjusts to the supply voltage. The power supply operates from 100 VAC to
240 VAC.
274
Management port
10 Gigabit
uplink option
"Summit XGM2-2xf Option Card" on page
328. The connecting redundant power supply cable is shipped
External power
supply connection
10 Gigabit
stacking ports
302.
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
Power socket
SH_033
"Summit XGM2-2xn Option Card" on
"EPS-600LS