Summit External Power Supplies (EPS)
Table 38: Summit switch and EPS compatibility (Continued)
Switch Model
Summit X450e Series Switches
Summit X450e-24p
Summit X450e-48p
Summit X250e Series Switches
Summit X250e-24t
Summit X250e-24p
Summit X250e-48t
Summit X250e-48p
Safety
Only trained service personnel should perform service to Extreme Networks switches and their
components. Trained service personnel have read all related installation manuals, have the technical
training and experience necessary to be aware of the hazards to which they are exposed in performing a
task, and are aware of measures to minimize the danger to themselves or other persons.
NOTE
See
Appendix A, "Safety Information"
for additional information regarding regulatory compliance certifications.
CAUTION
Be sure that proper ESD controls are in use before switch maintenance is performed. This includes but is not
limited to wrist straps that are grounded to the switch chassis and earth grounds.
308
Compatible EPS
EPS-LD External Power Supply Unit
EPS-600LS External Power Module with
EPS C Chassis
EPS-160 External Power Module with EPS-T
EPS-500 External Power Supply Unit
EPS-160 External Power Module with EPS-T
EPS-600LS External Power Module with
EPS C chassis
for additional safety information and
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
Model Number
45019
EPS-600LS: 10913
EPS-C: 10912
EPS-160: 10907
EPS-T: 10906
10911
EPS-160: 10907
EPS-T: 10906
EPS-600LS: 10913
EPS-C: 10912
Appendix B, "Technical Specifications"