Removing The Carton From The Chassis - Extreme Networks BlackDiamond 8800 Series Hardware Installation Manual

Installing a BlackDiamond 10808 Chassis

Removing the Carton from the Chassis

NOTE
You need at least 10 feet of overhead clearance to remove the shipping carton from the chassis.
To remove the carton from the chassis:
1 Remove the four v-boards from the corners of the crate, as shown in
Figure 71: V-boards in the chassis carton
2 Remove the four detachable plastic clip locks found near the bottom of the shipping carton, as
shown in Figure
Two clip locks are located on each side of the carton.
126
V-boards
72.
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
Figure 71.
EX_093A