Blackdiamond 8810 Switch Chassis - Extreme Networks BlackDiamond 8800 Series Hardware Installation Manual

Overview of the BlackDiamond Switches

BlackDiamond 8810 Switch Chassis

The BlackDiamond 8810 chassis consists of the following components:
One 10-slot chassis with backplane
●
Eight dedicated I/O module slots, labeled 1, 2, 3, 4, 7, 8, 9 and 10
●
One dedicated MSM slot, labeled 5/A
●
One dual-use I/O module/MSM slot (labeled 6/B)
●
Up to six power supplies, accessed from the front of the unit
●
One fan tray, accessed from the front right of the unit
●
One connector for an ESD-preventive wrist strap
●
When two MSMs are installed, the chassis can support up to 48 Gigabit bandwidth per slot.
Figure 8 shows the front of a BlackDiamond 8810 chassis equipped with two MSMs and three optional
I/O modules.
Figure 10: Front of the BlackDiamond 8810 chassis
Figure 9 shows the rear panel of the BlackDiamond 8810 chassis.
46
ESD wrist strap
connector
MSM module slot
Power supplies
Power cord
connectors
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
Fan tray
I/O module slots
I/O module slots
ASP042