Time Zone and DST
The following are windows used to configure time zones and Daylight Savings time settings for
SNTP. Open the Configuration folder, then the SNTP folder and click on the Time Zone and DST
link, revealing the following window.
The following parameters can be set:
Parameter
Time Zone and DST Settings
Daylight Saving
Time State
Daylight Saving
Time Offset in
Minutes
Time Zone Offset
DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
Figure 6- 52. Time Zone and DST Settings window
Description
Use this pull-down menu to enable or disable the DST Settings.
Use this pull-down menu to specify the amount of time that will constitute your local DST
offset - 30, 60, 90, or 120 minutes.
Use these pull-down menus to specify your local time zone's offset from Greenwich
83