Password Protection - D-Link DES-3526 Manual

Password Protection

The DES-3526 does not have a default user name and password. One of the first tasks when settings
up the Switch is to create user accounts. If you log in using a predefined administrator-level user
name, you have privileged access to the Switch's management software.
After your initial login, define new passwords for both default user names to prevent unauthorized
access to the Switch, and record the passwords for future reference.
To create an administrator-level account for the Switch, do the following:
At the CLI login prompt, enter create account admin followed by the <user name> and press the Enter key.
•
You will be asked to provide a password. Type the <password> used for the administrator account being
•
created and press the Enter key.
You will be prompted to enter the same password again to verify it. Type the same password and press the Enter
•
key.
Successful creation of the new administrator account will be verified by a Success message.
•
The sample below illustrates a successful creation of a new administrator-level account with the user
name "newmanager".
DES-3526:4#create account admin newmanager
Command: create account admin newmanager
Enter a case-sensitive new password:********
Enter the new password again for confirmation:********
Success.
DES-3526:4#
DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
NOTE: Passwords are case sensitive. User names and
passwords can be up to 15 characters in length.
NOTICE: CLI configuration commands only modify the running
configuration file and are not saved when the Switch is rebooted.
To save all your configuration changes in nonvolatile storage, you
must use the save command to copy the running configuration file
to the startup configuration.
18