Time Zone And Dst - D-Link des-3010f User Manual

DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual

Time Zone and DST

The following are screens used to configure time zones and Daylight Savings time settings for SNTP. Open the Administration
folder, then the SNTP folder and click on the Time Zone and DST link, revealing the following screen.
The following parameters can be set:
Parameter Description
Daylight Saving Use this pull-down menu to enable DST Repeating Settings (Repeating) or DST Annual
Time State Settings (Annual). Selecting one of these will allow its corresponding field to be configured.
Daylight Saving Use this pull-down menu to specify the amount of time that will constitute your local DST offset
Time Offset in - 30, 60, 90, or 120 minutes.
Minutes
Time Zone Offset Use these pull-down menus to specify your local time zone's offset from Greenwich Mean Time
from GMT in +/- (GMT).
HH:MM
Using repeating mode will enable DST seasonal time adjustment. Repeating mode requires that the DST beginning
and ending date be specified using a formula. For example, specify to begin DST on Saturday during the second week
of April and end DST on Sunday during the last week of October.
Enter the week of the month that DST will start.
From Which Week
of the month
From Which Day of Enter the day of the week that DST will start on.
the Week
From Which Month Enter the month DST will start on.
From What Time Enter the time of day that DST will start on.
HH:MM
Figure 6- 13. Time Zone and DST Settings page
Time Zone and DST
DST Repeating Settings
40