Web Pages - D-Link DES-3526 Manual

Area 2
Area 3

Web Pages

When you connect to the management mode of the Switch with a web browser, a login window is
displayed. Enter a user name and password to access the Switch's management mode.
Below is a list and description of the main folders available in the web interface:
Configurations – Contains windows concerning configurations for IP Address, Switch Information,
Advanced Settings, Port Configuration, IGMP, Spanning Tree, Forwarding Filtering, VLANs, Port
Bandwidth, SNTP Settings, Port Security, QoS, MAC Notification, LACP, Access Profile Table,
System Log Servers, PAE Access Entity, and Layer 3 IP Networking.
Security Management – Contains windows concerning configurations for Security IP, User
Accounts, Access Authentication Control (TACACS), Secure Sockets Layer (SSL), Secure Shell
(SSH), and SNMP V3.
Monitoring – Contains windows concerning monitoring the Switch, pertaining to Port Utilization,
CPU Utilization, Packets, Errors Size, MAC Address, IGMP Snooping Group, IGMP Snooping
Forwarding, VLAN Status, Router Port, Port Access Control and Layer 3 Feature.
Maintenance – Contains windows concerning configurations and information about Switch mainte-
nance, including TFTP Services, Switch History, Ping Test, Save Changes, Reboot Services, and
Logout.
Single IP Management – Contains windows concerning information on Single IP Management,
including SIM Settings, Topology, and Firmware/Configuration downloads.
DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
Presents a graphical near real-time image of the front panel of the Switch. This area
displays the Switch's ports and expansion modules, showing port activity, duplex
mode, or flow control, depending on the specified mode.
Various areas of the graphic can be selected for performing management functions,
including port configuration.
Presents switch information based on your selection and the entry of configuration
data.
NOTICE: Any changes made to the Switch configuration
during the current session must be saved in the Save
Changes web menu (explained below) or use the command
line interface (CLI) command save.
NOTE: Be sure to configure the user name and password in
the User Accounts menu before connecting the Switch to the
greater network.
24