Ssh User Authentication - D-Link DES-3526 Manual

ARC4
Cast128-CBC
Twofish128
Twofish192
Twofish256
HMAC-SHA1
HMAC-MD5
HMAC-RSA
HMAC-DSA
Password
Public Key
Host-based
Click Apply to implement changes made.

SSH User Authentication

The following windows are used to configure parameters for users attempting to access the Switch
through SSH. To access the following window, click Security Management > Secure Shell > SSH
User Authentication.
DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
Use the pull-down to enable or disable the Arcfour encryption algorithm with Cipher
Block Chaining. The default is Enabled.
Use the pull-down to enable or disable the Cast128 encryption algorithm with Cipher
Block Chaining. The default is Enabled.
Use the pull-down to enable or disable the twofish128 encryption algorithm. The
default is Enabled.
Use the pull-down to enable or disable the twofish192 encryption algorithm. The
default is Enabled.
Use the pull-down to enable or disable the twofish256 encryption algorithm. The
default is Enabled.
Data Integrity Algorithm
Use the pull-down to enable or disable the HMAC (Hash for Message Authentication
Code) mechanism utilizing the Secure Hash algorithm. The default is Enabled.
Use the pull-down to enable or disable the HMAC (Hash for Message Authentication
Code) mechanism utilizing the MD5 Message Digest encryption algorithm. The default
is Enabled.
Public Key Algorithm
Use the pull-down to enable or disable the HMAC (Hash for Message Authentication
Code) mechanism utilizing the RSA encryption algorithm. The default is Enabled.
Use the pull-down to enable or disable the HMAC (Hash for Message Authentication
Code) mechanism utilizing the Digital Signature Algorithm encryption. The default is
Enabled.
Authentication Algorithm
This parameter may be enabled if the administrator wishes to use a locally configured
password for authentication on the Switch. The default is Enabled.
This parameter may be enabled if the administrator wishes to use a publickey
configuration set on a SSH server, for authentication on the Switch. The default is
Enabled.
This parameter may be enabled if the administrator wishes to use a host computer for
authentication. This parameter is intended for Linux users requiring SSH
authentication techniques and the host computer is running the Linux operating
system with a SSH program previously installed. The default is Enabled.
139