To delete an Enable Method List defined by the user, click the X under the Delete heading corre-
sponding to the entry desired to be deleted. To modify an Enable Method List, click on its hyperlinked
Method List Name. To configure a Method List, click the Add button.
Both actions will result in the same window to configure:
To define an Enable Login Method List, set the following parameters and click Apply:
Parameter
Method List Name
Method 1, 2, 3, 4
DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
Figure 7- 14. Enable Method List Settings window
Figure 7- 15. Enable Method List - Edit window
Figure 7- 16. Enable Method List - Add window
Description
Enter a method list name defined by the user of up to 15 characters.
The user may add one, or a combination of up to four of the following authentication
methods to this method list:
local_enable - Adding this parameter will require the user to be
•
authenticated using the local enable password database on the Switch. The
131