Time Interval
Record Number
Bytes
Packets
Show/Hide
Clear
View Table
View Line Chart
Errors
The Web Manager allows port error statistics compiled by the Switch's management agent to be
viewed as either a line graph or a table. Four windows are offered.
Received (RX)
Click the Received (RX) link in the Error folder of the Monitoring menu to view the following
graph of error packets received on the Switch.
DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
Select the desired setting between 1s and 60s, where "s" stands for seconds. The
default value is one second.
Select number of times the Switch will be polled between 20 and 200. The default
value is 20.
Counts the number of bytes successfully sent from the port.
Counts the number of packets successfully sent on the port.
Check whether or not to display Bytes and Packets.
Clicking this button clears all statistics counters on this window.
Clicking this button instructs the Switch to display a table rather than a line graph.
Clicking this button instructs the Switch to display a line graph rather than a table.
Figure 8- 9. Rx Error Analysis window (line graph)
159