D-Link DES-3526 Manual page 64

The user may configure the following parameters to configure the CIST on the Switch.
Parameter
MSTI ID
Type
VID List (1-4094)
Priority (0-61440)
Click Apply to implement changes made.
To configure the parameters for a previously set MSTI, click on its hyperlinked MSTI ID number,
which will reveal the following window for configuration.
The user may configure the following parameters for a MSTI on the Switch.
Parameter
DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
Figure 6- 23. Instance ID Settings window - CIST modify
Description
The MSTI ID of the CIST is 0 and cannot be altered.
The type of configuration about to be processed. This window is used to set the
priority for the CIST only. All other parameters are permanently set and therefore
unchangeable.
This field is used to specify the VID range from configured VLANs set on the Switch.
Supported VIDs on the Switch range from ID number 1 to 4094. This field is
inoperable when configuring the CIST.
Select a value between 0 and 61440 to specify the priority for a specified MSTI for
forwarding packets. The lower the value, the higher the priority. This entry must be
divisible by 4094.
Figure 6- 24. Instance ID Settings window – modify
Description
51