This page allows you to determine which port on a given switch will be allowed to forward packets to
other ports on that switch.
The user may set the following parameters:
Parameter
Port
Forward Portlist
Clicking the Apply button will enter the combination of transmitting port and allowed receiving ports
into the Switch's Traffic Segmentation Table.
System Severity Alerts
The Switch can be configured to allow alerts be logged or sent as a trap to an SNMP agent or both.
The level at which the alert triggers either a log entry or a trap message can be set as well. Use the
System Severity Settings menu to set the criteria for alerts. The current settings are displayed below
the Settings menu.
DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
Figure 6- 47. Traffic Segmentation Setting window
Description
Check the corresponding boxes for the port(s) you wish to transmit packets.
Check the boxes to select which of the ports on the Switch will be able to forward
packets. These ports will be allowed to receive packets from the port specified above.
78