D-Link DES-3526 Manual page 109

Figure 6- 64. Access Rule Configuration window (Packet Content Mask)
To set the Access Rule for the Packet Content Mask, adjust the following parameters and click Apply.
Parameter
Profile ID
Mode
Access ID (1-65535)
Type
DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
Description
This is the identifier number for this profile set.
Select Permit to specify that the Switch, according to any additional rule, forwards the
packets that match the access profile added (see below).
Select Deny to specify that packets that do not match the access profile are not
forwarded by the Switch and will be filtered.
Type in a unique identifier number for this access or use Auto Assign.
Selected profile based on Ethernet (MAC Address), IP address or Packet Content
Mask.
96