Igmp Snooping Forwarding - D-Link DES-3526 Manual

VLAN ID
Multicast Group
MAC Address
Queries
Reports
Port Map
NOTE: To configure IGMP snooping for the DES-3526, go to the
Configuration folder and select IGMP. Configuration and other
information concerning IGMP snooping may be found in Section 6 of
this manual under IGMP.

IGMP Snooping Forwarding

This window will display the current IGMP snooping forwarding table entries currently configured on
the Switch. To view the following screen, open the Monitoring folder and click the IGMP Snooping
Forwarding link.
The user may search the IGMP Snooping Forwarding Table by VID clicking the top left hand corner
Search button.
The following field can be viewed:
Parameter Description
VLAN ID
DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
The VLAN ID (VID) of the multicast group.
The IP address of the multicast group.
The MAC address of the multicast group.
A read-only field showing the status of the Querier State. Disabled implies that the
Switch is not transmitting IGMP Snooping Query packets, while Enabled means those
packets are being transmitted.
The total number of reports received for this group.
These are the ports where the IGMP packets were snooped are displayed.
Figure 8- 18. IGMP Snooping Forwarding Table window
The VLAN ID (VID) of the multicast group.
168