Firmware Upgrade - D-Link DES-3526 Manual

Group
Add to group - add a candidate to a group. Clicking this option will reveal the following dialog box for the user
•
to enter a password for authentication from the Candidate Switch before being added to the SIM group. Click
OK to enter the password or Cancel to exit the window.
Remove from Group - remove an MS from the group.
•
Device
Configure - will open the web manager for the specific device.
•
View
Refresh - update the views with the latest status.
•
Topology - display the Topology view.
•
Help
About - Will display the SIM information, including the current SIM version.
•

Firmware Upgrade

This window is used to upgrade firmware from the Commander Switch to the Member Switch.
Member Switches will be listed in the table and will be specified by Port (port on the CS where the
MS resides), MAC Address, Model Name and Version. To specify a certain Switch for firmware
download, click its corresponding check box under the Port heading. To update the firmware, enter the
DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
Figure 10- 18. Input password dialog box
NOTE: Upon this firmware release, some functions of the SIM can
only be configured through the Command Line Interface. See the
DES-3526 Command Line Interface Reference Manual for more
information on SIM and its configurations.
194