Multiple Image Services; Firmware Information - D-Link DES-3526 Manual

Managed layer 2 ethernet switch 24-port 10/100mbps and 2ge ports
Hide thumbs Also See for DES-3526:
Table of Contents

Advertisement

Multiple Image Services

The Multiple Image Services folder allows users of the xStack family of switches to configure and
view information regarding firmware located on the Switch. The Switch allows two firmware images
to be stored in its memory and either can be configured to be the boot up firmware for the Switch. For
information regarding firmware images located on the Switch, open the Firmware Information link.
The default setting for the Switch's firmware will have the boot up firmware stored in Image 1, but the
user may set either firmware stored to be the boot up firmware by using the Config Firmware Image
window.

Firmware Information

The following screen allows the user to view information about current firmware images stored on the
Switch. To access the following screen, click Maintenance > MULTIPLE IMAGE Services >
Firmware Information.
This window holds the following information:
Parameter
BOX
ID
Version
Size
Update Time
DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
Figure 9- 5. Firmware Information window
Description
States the stacking ID number of the switch in the switch stack.
States the image ID number of the firmware in the Switch's memory. The Switch can
store 2 firmware images for use. Image ID 1 will be the default boot up firmware for
the Switch unless otherwise configured by the user.
States the firmware version.
States the size of the corresponding firmware, in bytes.
States the specific time the firmware version was downloaded to the Switch.
177

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Des-3526dc

Table of Contents