Application's Authentication Settings - D-Link DES-3526 Manual

Click Apply to implement changes made.

Application's Authentication Settings

This window is used to configure switch configuration applications (console, Telnet, SSH, web) for
login at the user level and at the administration level (Enable Admin) utilizing a previously configured
method list. To view the following window, click Security Management > Access Authentication
Control > Application Authentication Settings:
The following parameters can be set:
Parameter
Application
Login Method List
Enable Method List
Click Apply to implement changes made.
DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
authentication attempts. Users failing to be authenticated after the set amount of
attempts will be denied access to the Switch and will be locked out of further
authentication attempts. Command line interface users will have to wait 60
seconds before another authentication attempt. Telnet and web users will be
disconnected from the Switch. The user may set the number of attempts from 1 to
255. The default setting is 3.
Figure 7- 6. Application's Authentication Settings window
Description
Lists the configuration applications on the Switch. The user may configure the
Login Method List and Enable Method List for authentication for users utilizing the
Console (Command Line Interface) application, the Telnet application, SSH and
the WEB (HTTP) application.
Using the pull down menu, configure an application for normal login on the user
level, utilizing a previously configured method list. The user may use the default
Method List or other Method List configured by the user. See the Login Method
Lists window, in this section, for more information.
Using the pull down menu, configure an application for normal login on the user
level, utilizing a previously configured method list. The user may use the default
Method List or other Method List configured by the user. See the Enable Method
Lists window, in this section, for more information
125