D-Link DES-3526 Manual page 128

To configure Limited IP Multicast Range:
1. Choose the port or sequential range of ports using the From...To... port pull-down menus.
2. Use the remaining pull-down menus to configure the parameters described below:
Parameter
State
From Multicast IP
To Multicast IP
DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
Figure 6- 83. Limited Multicast VLAN Range window
Description
Toggle the State field to either Enabled or Disabled a given port or group of
ports where access is to be either permitted or denied.
Enter the lowest multicast IP address of the range.
Enter the highest multicast IP address of the range.
115