DES-1228/ME Layer 2 Fast Ethernet Managed Switch
Multiple Image Services
To configure the files located on the Flash memory, use the following windows to guide you. The Multiple Image Services folder
contains windows to allow the user to view Firmware Information and to configure Firmware Image, to view these windows click
Administration > Multiple Image Services .
Firmware Information
This window is used to view boot up firmware images. To view this window, click, Administration > Multiple Image Services
> Firmware Information.
Figure 6- 22. Firmware Information window
Config Firmware Image
The following window is used to determine which of the two firmware images will be used as the default boot file. You can also
delete either of the two images. To view this window click, Administration > Multiple Image Services > Config Firmware
Image.
Figure 6- 23. Config Firmware Image window
50