Entering The Dept. Id And Password - Canon imageRunner 400 Reference Manual

Operations after Using Copy Functions

Entering the Dept. ID and Password

When Department ID Management has been set, the department ID and password must be entered
before starting to make copies.
MEMO
If you press the
appears in the touch panel display. Insert the control card into the card slot. (For details, see "Inserting the
Control Card," on p. 8-2.)
Operations after the Turning Power ON
Operation When User Restrictions are Enabled
1
After making copies, remove the control card.
The touch panel display returns to the screen for inserting the control
card.
NOTICE
key when you are not using the control card, the message "Insert a control card."
COPY
1
Press the
The screen on the left appears.
MEMO
2
Press the [DEPT. ID] key, and enter the depart-
ment ID.
After a control card is removed, it must be inserted again
before copies can be made.
key.
COPY
For details on operations to carry out to turn the power ON,
see "Main Power and Control Panel Power," on p. 1-8.
MEMO
Enter the four-digit department ID with the Number
keys ( - ).
0 9
If you make a mistake when entering values, press the
Clear
key, and enter the values again.
C
8–3