Service Call Message - Canon imageRunner 400 Reference Manual

Service Call Message

If a malfunction occurs and the machine will not operate
normally, the message on the left (the service call
message) will appear in the touch panel display.
If this message appears, follow the procedure described
below.
1
WARNING
Do not insert or unplug the power plug with wet hands, as this may
result in electrical shock.
CAUTION
Always grasp the plug portion when unplugging the power plug.
Pulling on the power cord may expose or snap the core wire, or
otherwise damage the power cord. If the cord is damaged, this could
cause an electricity leak and result in a fire or electrical shock.
Turn the main power switch OFF. Allow at least 10
seconds before turning the main power switch back
ON.
2
If the machine still does not operate normally,
carry out the following procedure, and then
contact your service representative:
• Turn the main power switch OFF.
• Unplug the power cable from the outlet.
6–21