Replacing The Staple Case In The Stapler Unit - Canon imageRunner 400 Reference Manual

Finisher-E1

Replacing the Staple Case in the Stapler Unit

7–38
When the Finisher runs out of staples, the staple case must be replaced.
The message on the left will appear in the touch panel display. Follow the
procedure described below to replace the staple case.
1
Move the Finisher away from the machine holding
the section indicated in the figure on the left.
Main Unit
Finisher-E1
2
Pull out the staple cartridge holding it by
its left and right sides (Green portion).
3
Pull out the empty staple case holding
it by its left and right sides.