Feeding Different-Size Originals Together In The Feeder (Dif. Size Original) - Canon imageRunner 400 Reference Manual

Feeding Different-size Originals Together
in the Feeder
You can feed different-size of originals (e.g.11"x17" and LTR) together in one group in the
feeder, provided that the leading edge of each page is the same length.
NOTICE
This feature is only available when the machine is equipped with the feeder.
All originals placed together in the feeder must be the same weight (paper type).
Paper sizes in which the leading edge of each page are different (e.g. 11"x17" and LTR) cannot be fed
together.
Note that if you mix paper in the order LTRR followed by STMT, stapling will result in the copies being
stapled the wrong side up.
You cannot use this mode together with the Multi-page Enlargement, Entire Image, Image Combination,
Image Separation or Booklet modes.
3–10
(DIF. SIZE ORIGINAL)
1
Place your originals in the feeder and press the
[SPECIAL FEATURES] key.
2
Press the [DIF. SIZE ORIGINAL] key.
3
Press the [DONE] key.
The display returns to the Basic Features screen.
4
Proceed to make copies in the usual
way.
MEMO
To cancel the settings, press the [SPECIAL
FEATURES] and [DIF. SIZE ORIGINAL] keys
in that order.
You can also cancel the mode by pressing
Reset
the key. (The machine returns to the
Standard mode.)