Replacing The Stamp Cartridge (When The Fax Function Is Installed) - Canon imageRunner 400 Reference Manual

DADF-A1

Replacing the Stamp Cartridge (When the fax function is installed)

Originals sent by FAX via the feeder attached to this machine can be stamped to indicate that they have
been sent. Replace the stamp cartridge when this mark is faint or is no longer printed.
7–12
1
Open the feeder.
2
Remove the old stamp cartridge using twee-
zers while holding down the lock lever with
your finger. The lock lever is for securing the
stamp cartridge.
3
Insert the new stamp cartridge using
tweezers while holding down the lock lever
with your finger as shown in the figure on
the right.
4
Gently lower the feeder.