Custom Settings For Copying, Fax And Printing; Selecting The Default Function (Copy/Fax) At Power On; Selecting The Default Display After Auto Clear - Canon imageRunner 400 Reference Manual

Custom Settings for Copying, FAX and Printing

MEMO
The Custom Common Settings screen is made up of several screens. Use the [ ] and [ ] keys to scroll to the
desired screen and make the required settings.
When [ ] or [ ] should be pressed, the indication

Selecting the Default Function (Copy/Fax) at Power On

Gives you the choice of whether or not to display the Basic Features screen for copy or FAX operations
when the power is turned ON.
NOTICE
If the machine does not support FAX functions, there is no need to set this function.
MEMO
The initial setting is "COPY."
1
Call up the desired screen as follows:
Additional Functions
Key

Selecting the Default Display After Auto Clear

Gives you the choice of whether or not to display the Basic Features screen set by the Initial Function
after an auto clear.
NOTICE
If the machine does not support FAX functions, there is no need to set this function.
The time delay for auto clear can be set. (See "Setting the Time Taken for Display to Return to Basic
Features Screen after Finishing Operations," on p. 4-26.)
MEMO
The initial setting is "INITIAL FUNCTION".
1
Call up the desired screen as follows:
Additional Functions
Key
4–6
is displayed in this manual.
2
Select the [COPY] or [FAX] key, then press the
[OK] key.
[COPY]: The Copy Basic Features screen is displayed when
the power supply is turned ON.
[FAX]: The Fax Basic Features screen is displayed when the
power supply is turned ON.
3
Press the [DONE] key.
Repeat this until the Basic Features screen appears again.