Two-Sided Copying; Making Two-Sided Copies From One-Sided Originals (1 2-Sided) - Canon imageRunner 400 Reference Manual

Two-Sided Copying

NOTICE
Non-standard paper sizes cannot be used to make two-sided copies.
Two-sided modes cannot be used with the Overlay, Two-page Separation, Image Combination, Image
Separation, Multi-page Enlarge, Transparency Interleaving and Booklet modes.
MEMO
The Two-sided mode that you have set is displayed above the [TWO-SIDED] key in the Basic Features
screen.
Copy paper used to make two-sided copies must conform to the following specifications.
• Paper size
• Paper weight : 17-lb bond (64 g/m
Making Two-sided Copies from One-sided Originals
This feature enables you to make two-sided copies from one-sided originals.
NOTICE
Be certain to place the original horizontally when making copies from LTRR, STMTR and other horizontal
sizes. If these originals are placed vertically, the back of the copy will be printed upside down.
MEMO
If there are an odd number of originals, the back of the last page is left blank. (The machine's counter
does not count the blank page as a copy.)
: 11"x17" to STMT (STMTR-size and paper less than 182 mm wide cannot be used.)
2
) to 20-lb bond (80 g/m
Originals
2
)
(1
Copy
2-SIDED)
2–33