Setting up Dedicated Trays for Copy, Fax and Printer
You can assign the exit trays of the optional Finisher-C1 and Saddle Finisher-C2 to be used for either
the copy, fax or printer function.
NOTICE
This setting is not required when the Finisher-C1 and the Saddle Finisher-C2 are not installed.
MEMO
The factory default settings are as follows.
• Tray A: Copy
It is possible to assign a single tray to both functions.
It is not possible to set the "Copy" or "Printer" only to tray C.
We recommend attaching the supplied labels to the trays for identifying their respective use. Blank labels
are also provided which you can fill out yourself. Because this machine does not incorporate printer
functions, the "Printer" labels are not used.
1
Call up the desired screen as follows:
Additional Functions
Key
Setting the Printing Priority
You can set the printing priority for the various functions of the machine. For example, the machine can
be set to output copies taking precedence over printing of documents that are being received by FAX.
MEMO
The initial settings are as follows.
• Copy: 1
1
Call up the desired screen as follows:
Additional Functions
Key
Custom Settings for Copying, FAX and Printing
• Tray B: Fax
• Tray C: Not assigned
2
Select the function for tray A, B, and C, then
press the [OK] key.
3
• Fax: 2
• PRINT: 3 (1, 2 and 3 indicate priority sequence)
Can be selected only on models equipped with the FAX
function.
Can be selected only on models equipped with the PRINTER
function.
Press the [DONE] key.
Repeat this until the Basic Features screen appears again.
4–13