When A Paper Jam Occurs In The Interrupt Tray - Canon imageRunner 400 Reference Manual

When a Paper Jam Occurs in the Interrupt Tray

If a paper jam occurs during an interrupt copy operation, the screen at left
appears. Remove all of the jammed paper using the following procedure.
CAUTION
When removing jammed originals or copy paper, take care not to cut
your hands on the edges of the original or copy paper.
When removing jammed paper or when inspecting the inside of the
machine, do not allow necklaces, bracelets or other metal objects to
touch the inside of the machine, as this may result in burns or electrical
shock.
When removing copy paper which has become jammed inside the
machine, take care not to allow the toner on the jammed copy paper to
come into contact with your hands or clothing, as this will dirty your
hands or clothing. If they become dirty, wash them immediately with cold
water. Washing with warm water will set the toner and make it impossible
to remove the toner stains.
When removing copy paper which has become jammed inside the
machine, remove the jammed copy paper gently to prevent the toner on
the paper from scattering and entering your eyes or mouth. If toner
enters your eyes or mouth, wash immediately with cold water and
consult a physician.
1
Move the Finisher away from the machine holding
the section indicated in the figure on the left.
2
Remove any jammed paper.
3
Connect the Finisher to the main unit.
4
Follow the instructions in the touch
panel display.
(See "Display Indicating How to Clear the Jam," on
p. 6-2.)
Finisher-C1/Saddle Finisher-C2
7–31