Configurations can be accessed through Figure 20-1, and modified accordingly.
The following table describes the labels in this screen.
LABEL
SAVE
Click SAVE to store your device's current configuration in the non-volatile memory. Do
this to keep your configuration changes even after turning off the device's power. Click
Restart after you save in order to have your configuration changes take effect.
Restart
Click Restart to have the device perform a software restart. Any configuration changes
you have made since your last save will be lost. Wait a minute before logging into the
device again.
Default
Click Default to clear all user-entered configuration information and return to the
factory default settings. The device will restart. Wait a minute before logging into the
device again.
Configuration, Save & Restart
Figure 20-2 Advanced Configuration Save & Restart
Table 20-1 Advanced Configuration Save & Restart
ZyAIR B-5000 User's Guide
DESCRIPTION
20-3