Advanced Configuration; Wireless Lan Overview; Configuring Wireless Lan - ZyXEL Communications ZYAIR G-1000 Quick Installation Manual

7. Fill in the fields in the last wizard configuration screen.
If you change the ZyAIR's IP address, you must use the new IP address if you want
8. Change the wireless parameter settings in the wireless stations to match those of the ZyAIR. Refer to the
user's guide for your wireless adapter.

5 Advanced Configuration

5.1 Wireless LAN Overview

This section introduces the wireless LAN and some basic configurations. Wireless LANs can be as simple
as two computers with wireless adapters communicating in a peer-to-peer network or as complex as a
number of computers with wireless adapters communicating through access points (APs) which bridge
network traffic to the wired LAN.

5.2 Configuring Wireless LAN

Click ADVANCED and WIRELESS to open the screen as shown next.
ZyAIR G-1000 Access Point
to access the web configurator again.
11
Select Get automatically to have the
ZyAIR obtain an IP address from a
DHCP server.
You must know the IP address
assigned to the ZyAIR (by the DHCP
server) to access the ZyAIR again.
Select Use fixed IP address to give
the ZyAIR a fixed, unique IP address.
Enter a subnet mask appropriate to
your network and the gateway IP
address if applicable.
Click Finish.