Figure 25-1 Supervisor Mode - ZyXEL Communications ZyAIR B-5000 User Manual

ZyAIR B-5000 User's Guide
ZyAIR-B5000 RS232 Daemon
setup
upgrade
enable
monitor
passwd
packet_filter
WLAN
configuration Telnet/RS232 Configuration Setting
show
write
reboot
su
sys_info
ping
>> exit
-------------------------------------------------------- [ Privilege : ROOT ]
Command : setup [more...]
Message :
------------------------------------------------------------------------------
'UP/DOWN' Move, 'RIGHT/LEFT' Select/Unselect, 'Home/End' Top/Bottom [^Q-
25-2
------------------------------------------------------------------------------
Quick setup system configuration
Upgrade system to new version
Enable configuration mode
Monitor system running status
Change supervisor password
Packet filter rules manager
Wireless LAN configuration
Showing system configuration
Write configuration and restart system
Restart system and activate new system configuration
Change to superviser(root) mode
Show system information
Ping test
Disable privilidge command or disconnect

Figure 25-1 Supervisor Mode

Version 1.5.8.200
Supervisor Mode