ZyAIR B-5000 User's Guide
LABEL
Model
Software Version
Build
CPU
RAM
Flash
Chipset
Firmware Version
Server IP Address
Host Name
24.5 Ping Test
The following screen shows the information required for a ping test.
Step 1.
Enter the IP address of the ZyAIR
Step 2.
Enter the number of packets that you want to send.
Step 3.
Enter the data size.
Command : ping <ip> [1~65534|-t] [1~1999]
Message : Please input the following information.
IP address <ip> :
Number of ping request packets to send (TAB Select) : None
Data size [1~1999] :
24-4
Table 24-3 Sys_info Mode
This is your ZyAIR B-5000 Outdoor Access Point & Bridge.
This displays the most recent software upgrade number.
This is the compilation number of this version.
This displays the type and speed of the Central Processing Unit.
This displays the Random Access Memory of the ZyAIR.
This displays the nonvolatile storage that can be electrically erased and
reprogrammed so that data can be stored, booted and rewritten as
necessary.
This displays the chip model.
This displays the most recent firmware upgrade number.
This field displays the server IP address that the ISP assigns to the ZyAIR.
This is the host name for the Bridge and Access Point, high speed WLAN in
this case.
Figure 24-3 Ping Test
DESCRIPTION
SMT Main Screen