Figure 23-9 Starting Console/Telnet Configuration - ZyXEL Communications ZyAIR B-5000 User Manual

ZyAIR B-5000 User's Guide
Step 6.
Type [ESC] to go to the status screen. This will reboot the ZyAIR. Figure 23-9 allows you to
enter the current network status, reset to defaults or reboot.
RUNTASK period_task...
RUNTASK dhcp_daemon...
RUNTASK telnetd_main...
RUNTASK httpd...
RUNTASK snmp_task...
RUNTASK 802dot1x...
RUNTASK Notify_Trap...
Starting Multitask...
Software Version : HWLAN 1.5.8.200
Current Network Status : Central Wireless Bridge
Bridge IP Address = 192.168.1.1
Ethernet:00090A020069 Wireless:00026F0553D0
Bridge MAC address cloned using wireless interface MAC
Wireless LAN Channel : 1 SSID : wireless
Press 's' or 'S' to show Current Network Status.
Press 'd' or 'D' to reset to default.
Press 'Esc' to reboot.
SNMP: SNMP_TRAP_warmStart OK!
23-8

Figure 23-9 Starting Console/Telnet Configuration

Accessing the ZyAIR via Telnet or Console Port