ZYXEL NWA1123-AC PRO - Access Point Quick Start Guide
Also See for NWA1123-AC PRO:

Advertisement

ZYXEL NWA1123-AC PRO - Access Point Quick Start Guide

Hardware Installation

Hardware Installation
Connect the UPLINK/PoE port to a router network through a PoE switch or a PoE injector (30W).
Note: The management LED keeps blinking green until cloud management or standalone configuration is finished. A PoE injector may not be included in your package. Please check with your vendor.

Option A: Cloud Management

Option 1: Use MAC address and serial number to add device in NCC
Follow the steps below to manage the NWA1123-AC PRO through the Zyxel cloud-based network management system.
Note: Make sure the connected router has Internet access.
Option A: Cloud Management - Step 1
Option A: Cloud Management - Step 2

  1. Go to the Zyxel Nebula Control Center (NCC) website (https://nebula.zyxel.com). Click Login and you will be redirected to the myZyxel.com portal page. Sign up for a myZyxel account and log in.
  2. Create an organization and a site (network) in the NCC.
  3. Enter the NWA1123-AC PRO's LAN MAC address and serial number (S/N) (see the label on the device) in the NCC configuration screen. Note: The NWA1123-AC PRO will go into cloud management mode automatically and restart after it is registered to a site. See the NCC User's Guide for more information about configuring the NWA1123-AC PRO through the NCC.

Option 2: Use Nebula app to add device

play.google.com
www.apple.com

Where to find QR code:
Where to find QR code

Download and open the Zyxel Nebula Mobile app. Log in with your myZyxel account.
Create an organization and site or select an existing site. Scan the NWA1123-AC PRO's QR code to add it to the site. (You can find the QR code in its web configurator dashboard or on a label on the device or its box manufactured after December 15, 2017.)
Note: The NWA1123-AC PRO will go into cloud management mode automatically and restart after it is registered to a site.

Option B: Standalone Configuration

If you don't want to manage the NWA1123-AC PRO through the Zyxel NCC, follow the steps below to configure the NWA1123-AC PRO (in standalone mode).

  1. Connection
  1. From a WiFi enabled computer, search for the NWA1123-AC PRO's default WiFi network name (Zyxel-xxxx, where xxxx is the last four characters of the MAC address) and connect to it.
    Open your web browser and enter "http://1.1.1.1" for initial configuration. Enter the default user name (admin) and password (1234). Click Login.
    Option B: Standalone Configuration - Step 1
  2. Use an Ethernet cable to connect your computer to the LAN1 port of the NWA1123-AC PRO.
    Use its DHCP-assigned IP or default static IP address "http://192.168.1.2" to access the web configurator. Make sure your computer IP address is in the same subnet as the NWA1123-AC PRO's.
    Option B: Standalone Configuration - Step 2
  1. The wizard appears automatically. Use the wizard to set up your NWA1123-AC PRO. Note: It takes 1 to 2 minutes to apply your wizard changes. The power LED will blink red and green alternatively. The power and WiFi LEDs then turn steady green when the system is ready. Check the Dashboard screen and note down the NWA1123-AC PRO's IP address in case you need to access it's web configurator again.
    Note: The 1.1.1.1 is for initial setup only. It is not usable after the NWA1123-AC PRO is configured.
    Option B: Standalone Configuration - Step 3
  2. Use the NWA1123-AC PRO's new wireless settings (SSID and key) to re-connect to the NWA1123-AC PRO's WiFi network for Internet access if you change them in the wizard.
    Option B: Standalone Configuration - Step 4

Wall / Ceiling Mounting

Wall / Ceiling Mounting - Step 1

  1. Mounting
  1. Wall mounting: Set the NWA1123-AC PRO's antenna switch to the WALL position. Drill two holes for the plastic wall plugs (A), 64.1 mm apart. Insert the plugs into the wall.
    Wall / Ceiling Mounting - Step 2
  2. Ceiling mounting: Set the NWA1123-AC PRO's antenna switch to the CEILING position. Screw the self-drilling drywall anchors (C) into the EN ceiling, 64.1 mm apart.
    Wall / Ceiling Mounting - Step 3
  1. Install two mounting screws through the holes on the bracket (B) into the plugs/anchors to secure the bracket to the wall/ceiling. Make sure the screws are snugly and securely fastened to the wall/ceiling.
    Wall / Ceiling Mounting - Step 4
  2. After the bracket is attached to the wall/ceiling, line up the UPLINK/PoE port on the NWA1123-AC PRO with the tab of the mounting bracket (B). Push the NWA1123-AC PRO in and turn it to the right until it clicks into place.
    Wall / Ceiling Mounting - Step 5

Support Information

North America
USA

+ 1 800 255 4101
support@zyxel.com
France
+33 (0) 892 692 610
support@zyxel.fr
UK
+ 44 (0) 118 912 1700
support@zyxel.co.uk
Spain
+ 911 792 100
soporte@zyxel.es
Germany
+ 49 (0) 2405 - 69 09 69
support@zyxel.de

See the User's Guide at www.zyxel.com for more information, including customer support and safety warnings.
EU Importer

Zyxel Communications A/S
Gladsaxevej 378, 2. th. 2860 Søborg, Denmark
http://www.zyxel.dk
US Importer
Zyxel Communications, Inc
1130 North Miller Street Anaheim, CA 92806-2001
http://www.us.zyxel.com
Copyright © 2018 Zyxel Communications Corp. All Rights Reserved.

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download ZYXEL NWA1123-AC PRO - Access Point Quick Start Guide

Advertisement

Need Assistance?

Do you have a question about the NWA1123-AC PRO that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents