Table of Contents
Advertisement
All features relating to system status, resetting and rebooting can be found in the
su mode. Future connections in the same console session will go directly to
screen SMT Main menu. If you cannot remember your system password you will
have to disconnect and reconnect to the ZyAIR and open a new console
HyperTerminal session. You will then have to reset to default and reboot.
The SMT main menu allows USER privileges. The supervisor mode allows ROOT privileges. This means
that you can
View quick setup.
Upgrade the system to new version.
Enable configuration mode (CONF privileges).
Monitor the system running status.
Change the supervisor password.
View the packet filter rules manager.
View the wireless LAN configuration.
Check Telnet/RS232 Configuration Settings.
Show the system configuration.
Write a configuration and restart system.
Reboot the ZyAIR.
25.1.1 Enable configuration mode
The Enable configuration mode allows you to access more configuration submenus and allows you to make
configuration changes as you would in the web configurator. Select Enable by using the Right or L or
[ENTER] keys. See section Table 24-2 for a list of the command controls.
Enable configuration mode allows CONF or configuration privileges. The following figure shows the
menus available in Enable mode.
Supervisor Mode
ZyAIR B-5000 User's Guide
25-3
Advertisement
Table of Contents
