Remote Wireless Bridge-To-Central Wireless Bridge - ZyXEL Communications ZyAIR B-5000 User Manual

21.2.8

Remote Wireless Bridge-to-Central Wireless Bridge

Figure 21-6 Remote Wireless Bridge-to-Central Wireless Bridge
Step 1. Set the Central Wireless Router/Bridge as a Central Wireless Bridge see section 21.2.2
(bridge IP address as 192.168.1.1).
Step 2. Set the Remote Wireless Router/Bridge as a Remote Wireless Bridge see section 21.2.6
(bridge IP address as 192.168.1.2)
Step 3.
Set wireless parameters on Remote Wireless Bridge: Channel and SSID, these parameters
must be the same as the Central Wireless Bridge.
Step 4. The left side subnet is transparent to the right side.
Step 5. Have a DHCP server assign IP addresses to PC1 and PC2.
Configuration Scenarios
ZyAIR B-5000 User's Guide
21-15