Remote Wireless Router-To-Central Wireless Bridge - ZyXEL Communications ZyAIR B-5000 User Manual

ZyAIR B-5000 User's Guide
21.2.9

Remote Wireless Router-to-Central Wireless Bridge

Figure 21-7 Remote Wireless Router-to-Central Wireless Bridge
Step 1. Set the Central Wireless Router/Bridge as a Central Wireless Bridge; see section 21.2.2
(bridge IP address is 192.168.1.1).
Step 2. Set wireless parameters on Central Wireless Bridge: Channel and SSID.
Step 3. Set the Remote Wireless Router/Bridge as a Remote Wireless Router; see section 21.2.7
(wireless interface IP is 192.168.1.2).
Step 4.
Set wireless parameters on Remote Wireless Router: Channel and SSID, these parameters
must be the same as the Central Wireless Bridge.
Step 5. Set the DHCP server service on the Remote Wireless Router and apply it on Ethernet Interface.
Step 6.
The remote ZyAIR assigns IP addresses to PC1 and PC2.
21-16 Configuration Scenarios