Table of Contents
Advertisement
ZyAIR B-5000 User's Guide
LABEL
Remote Wireless
Bridge
Remote Wireless
Router
PPP over Ethernet
(PPPoE)
Dynamic IP Address
(DHCP Client)
Static IP Address
(Fixed IP)
Back
NEXT
5.2
Quick Setup – TCP/IP
Use this screen to set up the TCP/IP configuration. See section 4.2 for information on all related fields.
5-4
Table 5-3 Remote Wireless Operation Mode
Description
If you selected Remote Wireless Router/Bridge in Bridge Operation Mode, see
Figure 5-1, then you can select Remote Wireless Bridge. See Part IV of this
User's Guide for configuration examples of bridging.
If you selected Remote Wireless Router/Bridge in Bridge Operation Mode, see
Figure 5-1, then you can select Remote Wireless Router. See Part IV of this
User's Guide for configuration examples of bridging.
Point-to-Point Protocol over Ethernet (PPPoE) also functions as a dial-up
connection. Therefore you'll also need a username and password and possibly
the PPPoE service name.
This information can be obtained from your Internet service provider.
Choose Dynamic IP Address (DHCP Client) if you would like to obtain an IP
address automatically each time you log on.
Static IP Address (Fixed IP). The ZyAIR must have a static IP address in this
case. You'll also need a login name, associated password, the DSL terminator IP
address and possibly a connection ID.
This information can be obtained from your Internet service provider.
Click Back to go to the tutorial screen.
Click NEXT to continue.
Bridge Quick Setup
Advertisement
Table of Contents
