Snmp Trap Overview; Snmp Trap Parameters Configuration; Table 19-3 Snmp Traps; Table 19-4 Ports And Interface Types - ZyXEL Communications ZyAIR B-5000 User Manual

Table 19-2 Advanced Configuration SNMP Community Modify
LABEL
FINISH Click FINISH to begin modifying SNMP Community Parameters afresh.
CANCEL Click CANCEL to begin modifying SNMP Community Parameters afresh.

19.5 SNMP Trap Overview

The ZyAIR will send traps to the SNMP manager when any one of the following events occurs:
TRAP #
1 coldStart (defined in RFC-1215)
2 warmStart (defined in RFC-1215)
The following table maps the physical port and encapsulation to the interface type.
PHYSICAL
LookBack (virtual)
Wireless
Ethernet
PPPoE

19.6 SNMP Trap Parameters Configuration

To view your ZyAIR's SNMP Trap settings, click ADVANCED CONFIG, SNMP TRAP. The screen
appears as shown.
SNMP

Table 19-3 SNMP Traps

TRAP NAME

Table 19-4 Ports and Interface Types

DESCRIPTION
A trap is sent after booting (power on).
A trap is sent after booting (software reboot).
PORT/ENCAP
if0
if1
if2
if3
ZyAIR B-5000 User's Guide
DESCRIPTION
INTERFACE TYPE
enet-encap
enet-encap
pppoe-encap
19-5